Driver installation
Posted: Fri Dec 11, 2020 5:51 pmAutomatic driver installation:
1. Open GOverlay
2. Go to LCDSysInfo 3.5'' > Tools > Driver installation
3. Select 3.5'' version and the driver should automatically install
Automatic driver installation with command prompt:
1. Download http://goverlay.com/UserFiles/GOverlay/ ... ll_2.0.zip
2. Unzip into c:\temp\
3. Open a privileged command prompt (Guide on how to open it with admin privileges https://www.howtogeek.com/194041/how-to ... ndows-8.1/ )
4. go into the folder you have uncompressed the files, to do so, write "cd c:\temp"
5. execute the installer: to do so, write "install-driver.bat" and press enter.
Manual driver installation:
1. Open GOverlay
2. Go to LCDSysInfo 3.5'' > Tools > Driver installation
3. Select 3.5'' version and the driver should automatically install
Automatic driver installation with command prompt:
1. Download http://goverlay.com/UserFiles/GOverlay/ ... ll_2.0.zip
2. Unzip into c:\temp\
3. Open a privileged command prompt (Guide on how to open it with admin privileges https://www.howtogeek.com/194041/how-to ... ndows-8.1/ )
4. go into the folder you have uncompressed the files, to do so, write "cd c:\temp"
5. execute the installer: to do so, write "install-driver.bat" and press enter.
Manual driver installation:
- How to install the driver on windows 10?
Guide: https://www.goverlay.com/content/faq/
How to install the driver on windows 8?
Guide: https://www.goverlay.com/content/faq/
How to install the driver on windows 7?
Guide: https://www.goverlay.com/content/faq/