Shared Profiles

Profiles shared thru the GOverlay APP for LCDSysInfo 3.5 ONLY.
  • Announcements
    Replies
    Views
    Last post
  • Topics
    Replies
    Views
    Last post
  • Profile: ryzen7_rx6900xt_with_aida
    Attachment(s) by PolytroX » Sun Jan 23, 2022 12:29 pm
    Prozessor: Ryzen 7 2700X 8x3700GHz So AM4
    Mainboard: ASRock X470 Taichi Ultimate AMD X470 So.AM4 Dual Channel DDR4 ATX Retail
    Speicher: 32GB G.Skill Trident Z RGB für AMD Ryzen DDR4-3200 DIMM CL16 2x Dual Kit
    CPU Kühler: ARCTIC Freezer 13 - Prozessorkühler mit 92 mm PWM
    Grafikkarte: AMD 8GB Sapphire Radeon RX Vega 64 Nitro+ Aktiv PCIe 3.0 x16 (Full Retail)
    Grafikkarte2: AMD 16GB AsRock RX6900XT Formula OC GDDR6 PCIe 4.0
    Netzteil: be quiet! Straight Power 11 750W ATX 2.4 (BN283)
    Tower: EMPIRE GAMING Warmachine - Gamer-PC-Gehäuse
    SSD: 2x M2 Samsung SSD 970 EVO 500 GB = 1TB
    SSD: 2x Samsung SSD 860 EVO 1 TB = 2TB
    Maus: Logitech G 903
    Tastatur: Logitech G15
    Monitor: Asus VG278Q, 1MS Reaktionszeit, 144Hz, G-Sync / FreeSync, 27"
    0 Replies
    12 Views
    Last post by PolytroX View the latest post
    Sun Jan 23, 2022 12:29 pm
  • Profile: novation - 2.2 (LCD2)
    Attachment(s) by ultra-S » Sat Jan 22, 2022 2:17 pm
    - Intel 6 Core (Temp, Power, Bus Speed, Core 1 Speed)
    - nVidia Geforce (Ram. Temp, Mhz Speed)
    - Lan (Ip, Ping, Uploard, Download)
    - Disk 1,2,3 for Samsung und Sandisk (Temp, Volumen)

    Have a nice day ! ;)
    0 Replies
    21 Views
    Last post by ultra-S View the latest post
    Sat Jan 22, 2022 2:17 pm
  • Profile: novation - 2.1 (LCD2)
    Attachment(s) by ultra-S » Fri Jan 21, 2022 10:34 pm
    ultra-S \ novation Skin 2.1
    Intel 6 Core (8700k) -
    Samsung m2
    Samsung SSD
    Sandisk SSD
    Lan
    Nvidia GPU
    0 Replies
    21 Views
    Last post by ultra-S View the latest post
    Fri Jan 21, 2022 10:34 pm
  • Profile: darkninja (LCD2)
    Attachment(s) by DarkNinja0860 » Fri Jan 21, 2022 7:52 pm
    darkninja0860 profile
    0 Replies
    15 Views
    Last post by DarkNinja0860 View the latest post
    Fri Jan 21, 2022 7:52 pm
  • Profile: davy dedead watercooling mod 5 loop (LCD2)
    Attachment(s) by davy-dee » Tue Jan 04, 2022 11:19 am
    Now that my custom loop was completed, I adjusted the tube locations and outlined the mainboard layout.
    Also improved the locations of some of the sensor readouts.
    0 Replies
    127 Views
    Last post by davy-dee View the latest post
    Tue Jan 04, 2022 11:19 am
  • Profile: Art NPC NZXT
    Attachment(s) by Artanis » Wed Dec 29, 2021 12:50 am
    A simple, NZXT-themed GOverlay for my home rig. Added some custom icons and self-made vector graphics. Some extra work will be necessary (additional icons for weather and volume symbol, a custom font, etc.). This is just a first draft, as I received my GOverlay literally just a few hours ago.
    0 Replies
    235 Views
    Last post by Artanis View the latest post
    Wed Dec 29, 2021 12:50 am
  • Profile: Treleth
    Attachment(s) by Treleth » Wed Dec 08, 2021 1:19 am
    Several of the profiles featured here appeal to me, but I couldn't resist the urge to tinker and make one for myself. It's a fairly simple profile, but it does use HWiNFO for one of the sensors (CPU temp). Since the degrees symbol (°) is not part of the system font, I created the dial labels in Photoshop and simply included them in the background image. The dinosaur head is just something I like to use as a signature of sorts, but it too is part of the background and can be covered by a 60x49 pixel or larger icon of your choosing. The upper left and right corners each have two drive icons that are hidden unless they are nearly full (white at 70-89% and red at 90-100%). The background image has placeholders to help line up the drive icons, line graphs, and bar graphs.

    The dials are for GPU temp, CPU temp, and RAM usage
    The middle line graphs are GPU and CPU usage.
    The bar graphs at the bottom are usage indicators for the individual CPU cores.
    0 Replies
    705 Views
    Last post by Treleth View the latest post
    Wed Dec 08, 2021 1:19 am
  • Profile: guardian (LCD2)
    Attachment(s) by docbrown79 » Fri Dec 03, 2021 9:20 am
    Guardians of Galaxy Profile

    Have fun ;-)
    0 Replies
    902 Views
    Last post by docbrown79 View the latest post
    Fri Dec 03, 2021 9:20 am
  • Profile: davy dedead watercooling mod (LCD2)
    Attachment(s) by davy-dee » Fri Oct 15, 2021 8:27 pm
    Based on dedead's excellent watercooling display (thanks for the great baseline @dedead!)
    Modded schematic involving 2 radiators.
    1 Replies
    12831 Views
    Last post by dedead View the latest post
    Tue Nov 02, 2021 3:16 pm
  • Profile: gen01 v2 (LCD2)
    Attachment(s) by Apex » Wed Oct 27, 2021 9:24 am
    This is an updated version of gen01 created by Genesis2812. I changed the dimensions to make better use of the available space and updated the colour to better suit my system.
    0 Replies
    4409 Views
    Last post by Apex View the latest post
    Wed Oct 27, 2021 9:24 am
  • Profile: main -2 (LCD2)
    Attachment(s) by Mage_Mors » Sun May 19, 2019 9:22 pm
    Minimal first pass
    4 Replies
    15804 Views
    Last post by handyman View the latest post
    Fri Oct 22, 2021 11:50 am
  • Profile: davy simple design mod (LCD2)
    Attachment(s) by davy-dee » Fri Oct 15, 2021 8:30 pm
    Based on jt7005's excellent simple design (thanks for the great baseline @jt7005!)
    Modded for a few additional pieces of information.
    0 Replies
    6516 Views
    Last post by davy-dee View the latest post
    Fri Oct 15, 2021 8:30 pm
  • Profile: Simple Design
    Attachment(s) by jt7005 » Fri Jul 31, 2020 4:03 am
    A simple design that covers the basics. Hope you like it
    2 Replies
    6941 Views
    Last post by davy-dee View the latest post
    Thu Oct 14, 2021 6:57 pm
  • Profile: watercooling_schematic (LCD2)
    Attachment(s) by dedead » Tue Feb 16, 2021 12:22 am
    My first profile !
    Use Open Hardware Monitor for sensors and visual script to calculcate space disk with hard encode of the value of SSD.
    Maybe some accuracy on colors needed...
    3 Replies
    6061 Views
    Last post by davy-dee View the latest post
    Thu Oct 14, 2021 6:53 pm
  • Profile: Universal-Stat for any configuration (LCD2)
    Attachment(s) by ExileTM » Wed Oct 06, 2021 7:34 am
    [img:15mtwgb5]https://i.ibb.co/XjVjX3B/Title.png[/img:15mtwgb5]

    [img:15mtwgb5]https://i.ibb.co/txyYfKR/lcd35.png[/img:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]INTRODUCTION:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    Welcome!
    Universal-Stat ™ is a one-of-a-kind profile as it fits all PC configurations, for example it can fit an Intel/nVidia, Ryzen/nVidia, Intel/Radeon building PC and any of your other configurations.
    It can also be customized to fit any component you have installed. It supports all CPUs (AMD and Intel) and all graphics cards (nVidia and Radeon).

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]MAIN FUNCTIONS:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    - CPU temperature with 3-stage adaptive icon (Low, Middle, High)
    - GPU temperature with 3-stage adaptive icon (Low, Middle, High)
    - CPU and GPU fan speeds
    - Core GPU updated in real time (based on usage)
    - CPU core update in real time (based on usage)
    - Temperature and Space occupied by the Hard Disks (Where applicable)
    - FPS in real time (required RivaTuner)
    - Current screen resolution
    - Current refresh rate your Monitor
    - DirectX (or OpenGL ora Vulkan) version in foreground applications (required RivaTuner)
    - Illuminated LED of the Hard Disk that simulates the operation between reading and writing (Idle, Write and Read)
    - Plot Graphic which reports the operation of the CPU and GPU
    - Date and Time
    - Various network information
    - Various information on RAM

    [quote:15mtwgb5]
    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]CHANGELOG:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    v1.0 [06-10-2021]
    - Initial release

    v1.1 [07-10-2021]
    - Fixed an issue where the top bar of the nVidia frame had the part reserved for the name moved more to the right than the others
    - Fixed other minor graphics bugs
    [img:15mtwgb5]https://i.ibb.co/GsLX7d8/Intel-Nvidia.png[/img:15mtwgb5] -------> [img:15mtwgb5]https://i.ibb.co/p1dsmpR/Intel-Nvidia-preview.png[/img:15mtwgb5]

    v1.2 [08-10-2021]
    - In the performance chart (CPU & GPU), the grid with cleats and scale from 0 to 100 has been inserted.
    [i:15mtwgb5]Follow the guide in the second post for installation and an optimal result![/i:15mtwgb5]
    [img:15mtwgb5]https://i.ibb.co/d4BtCJV/Edit.png[/img:15mtwgb5]
    [/quote:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]INSTALLATION GUIDE:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    - [b:15mtwgb5]Before taking action, read and understand all the instructions, then go back to the beginning and get started.[/b:15mtwgb5]
    - Download (from the bottom of the post) the "[i:15mtwgb5][b:15mtwgb5]universalstat.gov[/b:15mtwgb5][/i:15mtwgb5]" profile and save it on your computer in a location of your choice
    - Once downloaded, open it with a double click, then the GOverlay software will open with a window where it will ask you to enter a name if necessary to be able to import it.
    - Click on OK, in order to add it to the list of profiles already present.
    - Now, before continuing in the GOverlay software, go back to this post and download the package of additional resources named [b:15mtwgb5][i:15mtwgb5]Download resource pack[/i:15mtwgb5][/b:15mtwgb5] (link at the bottom of the post).
    - The Mega.nz window will open, with all the necessary resources.
    - At the top right click on "[i:15mtwgb5]Download as zip[/i:15mtwgb5]", wait for the download and then save it preferably in the same place where you saved the previously downloaded profile (only for a matter of organization).
    - Unzip the zip file
    - Well, now you have everything you need to finish the installation
    - Now go back to the GOverlay software
    - Go to the LCDSysInfo 3.5" section and then select the "[b:15mtwgb5]Upload[/b:15mtwgb5]" tab
    - Now in the right part "[i:15mtwgb5]To Upload[/i:15mtwgb5]", click on the "[b:15mtwgb5]Select files to upload[/b:15mtwgb5]" button
    - Go to the path where you saved and unpacked the previously downloaded zip file
    - Open the folder containing the additional material and according to your configuration, select the exact background and click on "[b:15mtwgb5]Open[/b:15mtwgb5]" or "[b:15mtwgb5]OK[/b:15mtwgb5]" (note the name of the file)
    - The file will be added to the "[i:15mtwgb5]To Upload[/i:15mtwgb5]" table
    - Always using the "[b:15mtwgb5]Select files to upload[/b:15mtwgb5]" button, select and access any other resources (such as the image for temperature monitoring and hard disk)
    - Once the list in the table looks correct, you need to load it into the device
    - Click on the "[b:15mtwgb5]Upload list to the device[/b:15mtwgb5]" button and wait until completion
    - Now from the profile list select the profile "[i:15mtwgb5][b:15mtwgb5]universalstat[/b:15mtwgb5][/i:15mtwgb5]" (or the name you gave it to the profile at the beginning)
    - At the bottom right check that Background color is set to Black (38592)
    - A little further down under "[i:15mtwgb5]Background Image[/i:15mtwgb5]", select the background you have just loaded from the list
    - Click on "[b:15mtwgb5]Save and Apply[/b:15mtwgb5]" and you are done.


    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]INSTALLATION TIPS:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    To make the most of GOverlay's potential, it is recommended to install the [b:15mtwgb5][u:15mtwgb5][color=#FF4000:15mtwgb5]latest version[/color:15mtwgb5][/u:15mtwgb5][/b:15mtwgb5] of [url=https://aida64.it/prodotti/aida64-extreme:15mtwgb5]Aida64[/url:15mtwgb5] and [url=https://openhardwaremonitor.org/downloads/:15mtwgb5]Open HM[/url:15mtwgb5] on your computer.
    To work at its best and have no Layout problems, you need to download the basic images separately and load them through the Goverlay software inside your device.
    Subsequently it will be necessary to select the exact background of profile if necessary.
    Also remember to change the words "NAME MY CPU (and GPU)" with the names of your components (or whatever you want).
    You can color the text according to the applied background (having the same color of the frame and the text), for a guide on how to do this check the forum!
    I also recommend using the device's default fonts, in this case "Arial".
    Once the profile is applied review the various sensors that may be different from my motherboard and adjust them according to your needs.
    In the Goverlay program settings, select an update time of not less than one second, to avoid artifacts in the management of numbers and graphics.
    To simplify installation, I report the decimal color codes to be used in the same color as the background (same color for the frame and name of your device) for the current configurations available (see above):
    [list:15mtwgb5]AMD-nVidia = 54048-36544
    Intel-nVidia = 1247-36544
    AMD-Radeon = 54048-53445
    Intel-Radeon = 1247-53445[/list:u:15mtwgb5]
    [color=#FF4040:15mtwgb5][b:15mtwgb5]IMPORTANT: For any updates, it is not necessary to download the profile again, but only the pack of resources present in the "Download"[/b:15mtwgb5][/color:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]ADDITIONAL NOTES:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    [u:15mtwgb5]I remember that this profile was designed for the 3.5" LCDSysInfo device, more commonly known as LCD2[/u:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]GALLERY:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    Here is a practical example:
    [img:15mtwgb5]https://i.ibb.co/pdmL3RF/20211006-104642.jpg[/img:15mtwgb5]

    [quote:15mtwgb5][color=#00BF00:15mtwgb5][b:15mtwgb5]Currently the possible configurations are (The images are for illustrative purposes only. They do not necessarily represent the current look of the backgrounds.):
    [list:15mtwgb5]AMD-nVidia________________ Intel-nVidia
    [img:15mtwgb5]https://i.ibb.co/7WmKMQ8/AMDl-Nvidia.png[/img:15mtwgb5] [img:15mtwgb5]https://i.ibb.co/GsLX7d8/Intel-Nvidia.png[/img:15mtwgb5]

    AMD-Radeon_______________ Intel-Radeon
    [img:15mtwgb5]https://i.ibb.co/3vyFWW0/AMD-Radeon.png[/img:15mtwgb5] [img:15mtwgb5]https://i.ibb.co/GQFN7d4/Intel-Radeon.png[/img:15mtwgb5][/list:u:15mtwgb5]

    For any specific requests, you can ask here.[/b:15mtwgb5][/color:15mtwgb5][/quote:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]CREDIT:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    I thank [url=https://www.goverlay.com/forum/memberlist.php?mode=viewprofile&u=1426:15mtwgb5]Sub200[/url:15mtwgb5] for the original idea from which this project
    I thank [url=https://www.goverlay.com/forum/memberlist.php?mode=viewprofile&u=414:15mtwgb5]DooMknight87[/url:15mtwgb5] for the idea of the hard drive activity LED

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]CONCLUSIONS:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    [b:15mtwgb5][i:15mtwgb5][color=#FF4040:15mtwgb5]For information, help, missing links, general support, or to simply leave a review, please reply to the topic.
    Every now and then if you have nothing to do, come by ... you may find interesting updates and bug fixes.[/color:15mtwgb5][/i:15mtwgb5][/b:15mtwgb5]

    [color=#40BFFF:15mtwgb5][size=150:15mtwgb5][b:15mtwgb5][u:15mtwgb5]DOWNLOADS ▼:[/u:15mtwgb5][/b:15mtwgb5][/size:15mtwgb5][/color:15mtwgb5]
    In this link you will find all the material to load into your device, including the various backgrounds for the various configurations, the temperature sensors and the activity of the Hard Disks and possibly more ...
    Please Note: The images in the link may be subject to updates and changes!
    [url=https://mega.nz/folder/jk4EgYpI#9FLrqspGFqm0ENX83Npvsg:15mtwgb5]Download resource pack[/url:15mtwgb5]
    3 Replies
    7447 Views
    Last post by TheLaGmAn View the latest post
    Mon Oct 11, 2021 2:21 pm
  • Profile: ExileTM (LCD2)
    Attachment(s) by ExileTM » Sun Oct 03, 2021 2:15 pm
    [size=200:10piqwhk][color=orange:10piqwhk][b:10piqwhk][i:10piqwhk]ExileTM[/i:10piqwhk][/b:10piqwhk][/color:10piqwhk][/size:10piqwhk]

    Welcome, this is my first profile. This profile is based on Intel CPU i5 9600K and nVidia RTX 2060 graphics card, if you want to use it you can freely modify the background image, perhaps to remove my Nickname (I will leave the background attached via link).

    [u:10piqwhk][b:10piqwhk]MAIN FUNCTIONS[/b:10piqwhk][/u:10piqwhk]:
    - CPU temperature with 3-stage adaptive icon (Low, Middle, High)
    - GPU temperature with 3-stage adaptive icon (Low, Middle, High)
    - CPU and GPU fan speeds
    - Core GPU updated in real time (based on usage)
    - Current CPU core
    - Temperature and remaining life of the M2 SSD (Where applicable)
    - FPS in real time
    - Current screen resolution
    - DirectX (or OpenGL) version in foreground applications
    - Icon adaptive to hard disk activity (Idle, Write and Read)
    - Bar graphs to visualize the use of components in real time

    [quote:10piqwhk]Changelog v1:
    -Initial release

    v1.1
    -Fixed an issue that prevented the CPU speed from updating correctly[/quote:10piqwhk]

    :!: [color=red:10piqwhk]To work at its best and have no Layout problems, you need to download the basic images separately and load them through the Goverlay software inside your device. Subsequently it will be necessary to select the background of the ExileTM profile if necessary.
    I also recommend using the device's default fonts, in this case "Arial".
    Once the profile is applied review the various sensors that may be different from my motherboard and adjust them according to your needs.
    In the Goverlay program settings, select an update time of not less than one second, to avoid artifacts in the management of numbers and graphics.[/color:10piqwhk]
    [u:10piqwhk]I remember that this profile was designed for the 3.5" LCDSysInfo device, more commonly known as LCD2[/u:10piqwhk]

    In this link you will find all the material to load into your device, including the background, the temperature sensors and the activity of the Hard Disks:
    https://mega.nz/folder/mwB0mRoB#N7w5HShp2_VzTTYLUGxD5w

    [b:10piqwhk][i:10piqwhk][color=#FF4040:10piqwhk]For information, help, missing links and general support, please reply to the topic[/color:10piqwhk][/i:10piqwhk][/b:10piqwhk]
    1 Replies
    4924 Views
    Last post by ExileTM View the latest post
    Sun Oct 03, 2021 4:31 pm
  • Profile: main2 (LCD2)
    Attachment(s) by Mage_Mors » Sun May 19, 2019 9:24 pm
    first pass .. I am changing some of the images now but this is a start.
    4 Replies
    15980 Views
    Last post by Apex View the latest post
    Sat Oct 02, 2021 2:41 pm
  • Profile: My System
    Attachment(s) by hockeymaster14 » Tue Sep 14, 2021 6:01 am
    All i want to be informed.
    0 Replies
    8336 Views
    Last post by hockeymaster14 View the latest post
    Tue Sep 14, 2021 6:01 am
  • Profile: Profile skynet_final (LCD2)
    Attachment(s) by mano1989 » Sun Sep 05, 2021 7:11 am
    Skynet
    0 Replies
    8891 Views
    Last post by mano1989 View the latest post
    Sun Sep 05, 2021 7:11 am
  • Profile: Asus ROG Dials with FPS for Nvidia 3090
    Attachment(s) by shenronzero » Wed Aug 25, 2021 1:31 pm
    Modified Asus Dials design, based off the dials Profile created by Mage_Mors with added ROG font, FPS counter, FPS graph and 3090 design
    0 Replies
    10083 Views
    Last post by shenronzero View the latest post
    Wed Aug 25, 2021 1:31 pm
  • Profile: Asus ROG and Intel i9 Dials Profile
    Attachment(s) by shenronzero » Wed Aug 25, 2021 1:28 pm
    Modified Asus Dials design, based off the dials Profile created by Mage_Mors with added ROG font
    0 Replies
    7906 Views
    Last post by shenronzero View the latest post
    Wed Aug 25, 2021 1:28 pm
  • Profile: m0x23
    Attachment(s) by junkcoder » Thu Aug 19, 2021 9:57 am
    Easy to use profile for LCD 3,5"
    0 Replies
    8712 Views
    Last post by junkcoder View the latest post
    Thu Aug 19, 2021 9:57 am
  • Profile: steampunk (LCD2)
    Attachment(s) by dedead » Sat Aug 14, 2021 3:21 pm
    Second shared profile.
    Steampunk idea....could be improved.

    HD1 and HD 2 formula have to b e modified if needed
    1 Replies
    7347 Views
    Last post by dedead View the latest post
    Sat Aug 14, 2021 3:22 pm
  • Profile: Ryzen 3900X and RTX 2080 Super
    1, 2Attachment(s) by vinsgosselin » Thu Jun 25, 2020 7:32 pm
    Here is a profile I made for my new computer.
    18 Replies
    43183 Views
    Last post by urukay View the latest post
    Wed Aug 04, 2021 8:26 pm
  • Profile: simpleblack RyzenMSINvidia (LCD2)
    Attachment(s) by GERLion76 » Sun Aug 01, 2021 5:40 pm
    Simple Black and White Profile for 3.5" Goverlay.
    0 Replies
    9416 Views
    Last post by GERLion76 View the latest post
    Sun Aug 01, 2021 5:40 pm
Next

Return to Board index



Who is online

Users browsing this forum: No registered users and 3 guests

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

cron