LCD is always on,

Anything about GOverlay and the devices supported

LCD is always on,

Postby Raed » Mon Apr 29, 2019 6:43 am

I have many devices connected to my rig by USB. However, when I turn It off everything turns off except the Goverlay LCD screen. After sometime it turn to energy saving mode but it’s still powered on and I can see the lcd backlight.

USB power can’t be tuned off by windows 10 even with selective suspense mode is on and neither from my mobo. Did anyone figure out a way to turn of the LCD instead of showing energy saving mode message that keeps it always on.

Raed
 
Posts: 1
Joined: Mon Apr 29, 2019 6:33 am

Re: LCD is always on,

Postby TheLaGmAn » Tue May 14, 2019 9:05 pm

Have you tried changing the "Brightness when idle" to almost zero? It should tone down the backlight so you can barely see the screen.
User avatar
TheLaGmAn
Site Admin
 
Posts: 967
Joined: Wed Feb 26, 2014 8:32 pm


Return to About GOverlay



Who is online

Users browsing this forum: No registered users and 5 guests

cron