Page 1 of 1

Profile: Republic of Drivers 1.1

PostPosted: Thu Jun 08, 2017 10:00 pm
by DooMknight87
***DEPRECATED*** See new version: http://www.goverlay.com/forum/viewtopic.php?f=6&t=1622

Profile inspired on ASUS RoG products. It has all the information a gamer needs. Shows nice animations, all with an aggressive but elegant style.

The needles show the use of cpu (left) and gpu (center). The white bars inside those two gauges show the temperature, also shows it numerically in the center.

On the right is the memory indicator, where the sidebar shows the memory used, in addition to displaying the numerical values.

Finally, below I've put the information for an SSD and HDD (the most typical configuration), an animated icon of connectivity that is activated when there is network data flow, showing upload and download and the volume icon.

Update 1.1:

Added animation on both disks when sensor detects disk activity.
Fixed disk space units, now showing gb instead mb.
Some minor fixes.

Update 1.2:

Added write state animation on both disk sensors.

Re: Republic of Drivers 1.2

PostPosted: Tue Sep 12, 2017 4:17 am
by itlvk
Import error, please help
Image

Re: Republic of Drivers 1.2

PostPosted: Wed Sep 13, 2017 12:28 pm
by TheLaGmAn
Try the new version, i think i found the issue.

Re: Republic of Drivers 1.2

PostPosted: Thu Jan 17, 2019 2:42 pm
by JPVann
I'm new. What are you using for sensor data? I uploaded the profile but no info except for incorrect memory usage. Thanks!

Re: Republic of Drivers 1.2

PostPosted: Thu Jan 17, 2019 5:54 pm
by TheLaGmAn
JPVann wrote:I'm new. What are you using for sensor data? I uploaded the profile but no info except for incorrect memory usage. Thanks!


By default you will have a couple of sensors, but you might need to manually select those for the profile since everyone has different sensors (for ex, intel cpu sensors are not the same to amd sensors).
GOverlay has some sensors integrated with OpenHardwareMonitor, but make sure you run goverlay as admin to see all.

Re: Republic of Drivers 1.2

PostPosted: Sun Apr 28, 2019 4:56 am
by Gronar
How do I config sensor data to items under the sensor needle boxes in the profile screen of Goverlay? It's not showing my CPU temp and if I move the sensor needle box to get to it then I can't get it back to where it was so everything is lined up and pretty again.

Re: Republic of Drivers 1.2

PostPosted: Wed May 15, 2019 8:50 pm
by Mage_Mors
Is this complete. I imported it and all I get is the layout with no graphics or anything ?

I am new to the forums.. I used the 2.5 goverlay for years.. all I wanted was a bigger screen so I just go the 3.5. Seems all the stuff I could do in the 2.5 and special objects are not available in the 3.5 version

Re: Republic of Drivers 1.2

PostPosted: Thu May 16, 2019 1:05 pm
by TheLaGmAn
did it prompt you to upload the pictures to the device?