Page 3 of 5
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Sun Feb 16, 2020 6:10 pm
by TheLaGmAn
can you try exports again? i tried myself and went thru okay
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Sun Feb 16, 2020 8:32 pm
by dalupus
Now it is working. Had to reboot. Was like the completed confirmation window was getting hidden before.
Although upon reboot I noticed LHM library is reporting 0c for my cpu temp.
If I restart the GOverlay app then it starts to pickup the temp no issue.
I tried twice with the same result. When I start GOverlay manually I get the popup asking if I give permission for it to make mods to my system.
So it seems like maybe the LHM library isn't getting enough permissions if you have it autostart on boot?
I have it set to Autostart with Admin permissions from the options tab.
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Sun Feb 16, 2020 9:21 pm
by dalupus
And for 3 reboots it wasn't working and then this last time it is working. Might just be a timing thing not sure. I'll report back in a day or 2 on how it is working.
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Sun Feb 16, 2020 11:55 pm
by TheLaGmAn
ohm dll has proper reports? or that one has the same issue?
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Mon Feb 17, 2020 4:01 am
by Rutilus
Thanks!
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Tue Feb 18, 2020 1:10 am
by belgianfred2
Thanks
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Thu Feb 20, 2020 12:10 pm
by dalupus
TheLaGmAn wrote:ohm dll has proper reports? or that one has the same issue?
It seems OHM dll is reporting properly but specifically for the CPU usage I can't tell since that one doesn't work with OHM for my CPU.
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Thu Feb 20, 2020 10:05 pm
by tedharris600
Thanks
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Mon Feb 24, 2020 4:16 pm
by jwrpalmer
Thanks
Re: GOverlay BETA 1.6.9.3 - Major internal changes
Posted:
Fri Feb 28, 2020 6:09 pm
by test071
Thanks