Page 2 of 2

Re: goverlay closes randomly after a while

PostPosted: Sat Jun 22, 2019 12:28 am
by comfarol
It's turned off again it happened while i was asleep so not sure on the time. Can't see anything that could be related in event viewer.

Re: goverlay closes randomly after a while

PostPosted: Sat Jun 22, 2019 5:48 pm
by TheLaGmAn
can you test if without any display connected it still crashes?

Re: goverlay closes randomly after a while

PostPosted: Fri Jul 05, 2019 8:10 am
by comfarol
Just unplugging the device will be enough? Not my monitors right. Unplugging now might take a bit as usual.

Re: goverlay closes randomly after a while

PostPosted: Sat Jul 13, 2019 2:39 am
by comfarol
TheLaGmAn wrote:can you test if without any display connected it still crashes?

Yep, it still closed, screen unplugged.

Re: goverlay closes randomly after a while

PostPosted: Fri Jul 26, 2019 10:06 pm
by TheLaGmAn
okay thats very strange then, because goverlay would not be doing much without displays.
try to disable both displays in
lcdsysinfo2.8 > settings > enabled (to disabled).
Same on 3.5
configuration > goverlay vr and output to disabled.

see if it crashes then. if it does. further disable all plugins.
if it still crashes, do you have aida64, openhwm, siv, teamspeak, skype or mumble on your computer when it crashes?

Re: goverlay closes randomly after a while

PostPosted: Sat Jul 27, 2019 8:31 am
by comfarol
Of all those I have aida64. I have just reformatted for a other issue that i had come up with the computer. Setting it back up now, will see if that has a change.

also viewtopic.php?f=3&t=724 works on w10 64 1903. Nice and convenient :D

Re: goverlay closes randomly after a while

PostPosted: Thu Aug 08, 2019 8:46 pm
by comfarol
Still closes, only have HWiNFO. I will try the disable 2.8/3.5 thing. The 3.5 panel is auto enabling when I try disable.

Re: goverlay closes randomly after a while

PostPosted: Thu Aug 08, 2019 11:16 pm
by TheLaGmAn
try to disconnect both 2.8 and 3.5 and see if w/o those it still crashes

Re: goverlay closes randomly after a while

PostPosted: Fri Aug 09, 2019 5:59 am
by comfarol
TheLaGmAn wrote:try to disconnect both 2.8 and 3.5 and see if w/o those it still crashes


Where do i go to disconnect them in the software, cant seem to find it.

Re: goverlay closes randomly after a while

PostPosted: Fri Aug 09, 2019 1:14 pm
by TheLaGmAn
i mean usb disconnect it