GOverlay Forum

I have the LCD 3.5 it status shows "yellow" (Not Detected)

The logs show 12/11/2018 01:37:55:LCDSysInfo - Init
12/11/2018 01:37:55:LCDSysInfo - Error opening device
12/11/2018 01:37:56:LCDSysInfo - Init
12/11/2018 01:37:56:LCDSysInfo - Error opening device
12/11/2018 01:37:57:LCDSysInfo - Init
12/11/2018 01:37:57:LCDSysInfo - Error opening device
12/11/2018 01:37:58:LCDSysInfo - Init
12/11/2018 01:37:58:LCDSysInfo - Error opening device
12/11/2018 01:37:59:LCDSysInfo - Init


Here are the driver install:

Please run the goverlay tester and post the result

http://goverlay.com/UserFiles/GOverlay/ ... er_v05.zip

Here is the Report.txt file

The results are okay,
The log you posted before is showing that the LCD 1.0 (the 2.8'' screen) is the one not being detected, the 2.0 (3.5'' screen) seems fine.
Where in GOverlay it shows not detected? Are you going into the LCDSysInfo 3.5'' tab?

I have the 3.5 inch Display...I mean I actually measured it??

When I go to the LCDSysinfo 2.8" Device

When I go to the LCDSysinfo 3.5" Device

Then here is the "STATUS"

Okay, install or run teamviewer and send me an email with the code at support@goverlay.com so i can take a look.
The display should be working, could be a bug with the notification on that page.


https://www.teamviewer.com/en/download/windows/

issue solved, was a bug on the icon color, wasnt affecting the actual use of the device, i will post a beta that fixes it

Help please mine is the same not detected

What device do you have, the 2.8'' or 3.5'' ?

TheLaGmAn wrote:What device do you have, the 2.8'' or 3.5'' ?

3.5