Hello,
I'm trying to get my 3.5" display to work. I have GOverlay v1.6.4 and I have already installed the 3.5" drivers (I had to disable signature verification as per the FAQ).
However, when I load up GOverlay I get this error repeatedly:
10/28/2017 9:02:17 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:43 AM:LCDSysInfo - Init
10/28/2017 9:02:43 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:44 AM:LCDSysInfo - Init
10/28/2017 9:02:44 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:45 AM:LCDSysInfo - Init
10/28/2017 9:02:45 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:46 AM:LCDSysInfo - Init
10/28/2017 9:02:46 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:47 AM:LCDSysInfo - Init
10/28/2017 9:02:47 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:48 AM:LCDSysInfo - Init
10/28/2017 9:02:48 AM:LCDSysInfo - Error opening device
10/28/2017 9:02:49 AM:LCDSysInfo - Init
10/28/2017 9:02:49 AM:LCDSysInfo - Error opening device
In the GOverlay "Status" window, it says LCDSysInfo 3.5 is "Enabled" but "Not Detected"
My actual display is totally black with just the backlight on - I can actually adjust the backlight brightness under the Output-->LCDSysInfo 3.5"-->Settings-->LCD Brightness (up to 255) setting... so it seems like the display is connected properly, but some how the software isn't reading it completely.
Any advice on how to get this working?
Thanks.