Plot Graph Stops if Show Sensor value Enabled

Anything about GOverlay and the devices supported

Plot Graph Stops if Show Sensor value Enabled

Postby Kabron » Sun Apr 16, 2017 11:46 am

Plot Graph Stops if Show Sensor value Enabled

Kabron
 
Posts: 14
Joined: Tue Apr 11, 2017 11:54 am

Re: Plot Graph Stops if Show Sensor value Enabled

Postby TheLaGmAn » Sun Apr 16, 2017 2:02 pm

Could you check the logs to see if there are any errors in there? there will probably be, if so, can you go to "Wizard -> Backup GOverlay configuration" and send the config by email to support@goverlay.com ?
Thanks
User avatar
TheLaGmAn
Site Admin
 
Posts: 967
Joined: Wed Feb 26, 2014 8:32 pm

Re: Plot Graph Stops if Show Sensor value Enabled

Postby Kabron » Mon Apr 17, 2017 8:54 pm

Thanks, I can do it only on weekend.

Kabron
 
Posts: 14
Joined: Tue Apr 11, 2017 11:54 am

Re: Plot Graph Stops if Show Sensor value Enabled

Postby Kabron » Fri May 12, 2017 8:46 am

OK, returning to the question, I made an example.
Only one sensor works correctly: Latency:21
Enabling Show sensor value for all other sensors causes a lot of errors type of:
LCDSys - Sensor 1494576161.93897 (SensorPlotGraph: Plot Graph malfunction :Bringing the string "" to the "Double" type is invalid.
Profile and registry files attached.
Attachments
Goverlay.jpg
Goverlay.jpg (12.57 KiB) Viewed 12977 times
Profiles.zip
(15.31 KiB) Downloaded 611 times

Kabron
 
Posts: 14
Joined: Tue Apr 11, 2017 11:54 am

Re: Plot Graph Stops if Show Sensor value Enabled

Postby TheLaGmAn » Fri May 12, 2017 1:48 pm

Thanks for the info.

Can you try the BETA
1.5.4.1_zhn

and see if it still happens?
User avatar
TheLaGmAn
Site Admin
 
Posts: 967
Joined: Wed Feb 26, 2014 8:32 pm

Re: Plot Graph Stops if Show Sensor value Enabled

Postby Kabron » Sat May 20, 2017 11:37 am

I'd like to, but where it is?

Kabron
 
Posts: 14
Joined: Tue Apr 11, 2017 11:54 am

Re: Plot Graph Stops if Show Sensor value Enabled

Postby TheLaGmAn » Sat May 20, 2017 7:14 pm

Go to "Whats New" in GOverlay and at the bottom there is a button " Request BETA" , click there and enter

1.5.4.1_zhn
User avatar
TheLaGmAn
Site Admin
 
Posts: 967
Joined: Wed Feb 26, 2014 8:32 pm

Re: Plot Graph Stops if Show Sensor value Enabled

Postby Kabron » Sun May 21, 2017 7:33 am

Beta works OK.
Thanks a lot.

Kabron
 
Posts: 14
Joined: Tue Apr 11, 2017 11:54 am


Return to About GOverlay



Who is online

Users browsing this forum: No registered users and 8 guests