Top Process sensor sometimes does not work

[DooMknight87]

After doing all the steps carefully, I rebooted and now the sensor get stuck on 0, and the log show this message:

Code: Select all

15/02/2017 20:33:53:   en u.b()
15/02/2017 20:33:53:LCDSys - Sensor 1413234237,2667 (SensorBarGraph: Bar Graph malfunction : Referencia a objeto no establecida como instancia de un objeto.
15/02/2017 20:33:53:   en u.b()
15/02/2017 20:33:53:LCDSys - Sensor 1413233981,91002 (SensorBarGraph: Bar Graph malfunction : Referencia a objeto no establecida como instancia de un objeto.
15/02/2017 20:33:52:Plot Graph inited with bg color:800
15/02/2017 20:33:52:Plot Graph inited with bg color:34816
15/02/2017 20:33:51:   en u.b()
15/02/2017 20:33:51:LCDSys - Sensor 1413234237,2667 (SensorBarGraph: Bar Graph malfunction : Referencia a objeto no establecida como instancia de un objeto.
15/02/2017 20:33:51:   en u.b()
15/02/2017 20:33:51:LCDSys - Sensor 1413233981,91002 (SensorBarGraph: Bar Graph malfunction : Referencia a objeto no establecida como instancia de un objeto.
15/02/2017 20:33:51:LCDSys - Screen clear requested and done
15/02/2017 20:33:51:OHMD inited
15/02/2017 20:33:50:Req clear waiting 1
15/02/2017 20:33:50:Load error: Devuelto error HRESULT E_FAIL de una llamada a un componente COM. ::    en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   en System.Management.ManagementObject.Initialize(Boolean getObject)
   en System.Management.ManagementBaseObject.get_ClassName()
   en System.Management.ManagementClass.GetInstances(EnumerationOptions options)
   en System.Management.ManagementClass.GetInstances()
   en GOverlay.Form1.a(String A_0)
   en GOverlay.Form1.Form1_Load(Object sender, EventArgs e)

[TheLaGmAn]

check if the poweshell command works

[DooMknight87]

The powershell command works, but the sensor still in 0

[Gizmo1203]

I have also problems with the Top Process sensor information. It only displays "Idle)\Prozessor", even though the powershell command works fine. Any ideas?

That's the log message:

06.09.2018 18:12:54:ProcessWatch - Resetting Watcher "\Prozess(*)\Prozessorzeit (%)" -si 1
06.09.2018 18:12:51:ProcessWatch - Resetting Watcher "\Prozess(*)\Prozessorzeit (%)" -si 1
06.09.2018 18:12:38:ProcessWatch - Not reciving proper data, restarting watcher in 10 seconds. Run in CMD "lodctr /R" to fix it
06.09.2018 18:12:38:ProcessWatch - Resetting Watcher "\Prozess(*)\Prozessorzeit (%)" -si 1


---
Prozess=process
Prozessorzeit=process time

[TheLaGmAn]

Try with the BETA 1.6.4.11_cgu and check what it says in the logs after startup on the line

"ProcessWatch - Starts with parameters:"

then run typeperf with those parameters on powershell and post the output

[Gizmo1203]

Try with the BETA 1.6.4.11_cgu and check what it says in the logs after startup on the line

"ProcessWatch - Starts with parameters:"

then run typeperf with those parameters on powershell and post the output

I sent it to you in a PM..