Latency "sensor" <= 9 is not filled with zeroes

Anything about GOverlay and the devices supported

Latency "sensor" <= 9 is not filled with zeroes

Postby ChaosMage » Wed Feb 09, 2022 9:42 pm

Hi,

Not sure if thats me incorrectly setting up the field, but i have the latency sensor set up to show 3 digits, fill with zeroes and highlight in red if it goes above 100.
Everything looks good, my avg ping is 10-20ms, but when it drops to 9, its displayed as a single digit (doesnt fill with zeroes) with the center alignment (its set to left in the properties).
The way to reproduce is to ping your router (192.168.x.x).

Thank you!

ChaosMage
 
Posts: 6
Joined: Tue Feb 08, 2022 5:16 pm

Re: Latency "sensor" <= 9 is not filled with zeroes

Postby TheLaGmAn » Mon Feb 21, 2022 12:27 pm

which version of goverlay and which display?
User avatar
TheLaGmAn
Site Admin
 
Posts: 967
Joined: Wed Feb 26, 2014 8:32 pm

Re: Latency "sensor" <= 9 is not filled with zeroes

Postby ChaosMage » Wed Mar 09, 2022 6:36 pm

GOverlay version: 1.6.9.19
Device LCDSysInfo 3.5" FW: 246

ChaosMage
 
Posts: 6
Joined: Tue Feb 08, 2022 5:16 pm


Return to About GOverlay



Who is online

Users browsing this forum: No registered users and 9 guests

cron