Latency "sensor" <= 9 is not filled with zeroes
Posted: Wed Feb 09, 2022 9:42 pmHi,
Not sure if thats me incorrectly setting up the field, but i have the latency sensor set up to show 3 digits, fill with zeroes and highlight in red if it goes above 100.
Everything looks good, my avg ping is 10-20ms, but when it drops to 9, its displayed as a single digit (doesnt fill with zeroes) with the center alignment (its set to left in the properties).
The way to reproduce is to ping your router (192.168.x.x).
Thank you!
Not sure if thats me incorrectly setting up the field, but i have the latency sensor set up to show 3 digits, fill with zeroes and highlight in red if it goes above 100.
Everything looks good, my avg ping is 10-20ms, but when it drops to 9, its displayed as a single digit (doesnt fill with zeroes) with the center alignment (its set to left in the properties).
The way to reproduce is to ping your router (192.168.x.x).
Thank you!