Page 1 of 2

after a hard fight with display

PostPosted: Mon Mar 29, 2021 4:23 pm
by carmyyy
Good day people,

have ordered the IPS panel for 40 euro.
Unfortunately, it has then lasted only 1 month.

The Device was working perfect.

So contacted the support Cold-Electronics.
Had to bridge the device , flash with ---> 245 and its working.

Now the device works again, but the colors are shit.

i can not change the right color .... is the display broken ??.

if i pick the black color on the device its white.... i pick white its black.

hes anyone this before ?

i need help please
greetings from germany

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 6:24 pm
by JohnnyBlack
Grüße aus Berlin :D

I tried to flash my broken device with FW 241 and my display showed the same behaviour. After that I flashed FW 242. The colors are now the same as I've set.

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 6:40 pm
by carmyyy
habe es gerade auch anders geflasht... nun ist es wieder schwarz

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 6:40 pm
by carmyyy
JohnnyBlack wrote:Grüße aus Berlin :D

I tried to flash my broken device with FW 241 and my display showed the same behaviour. After that I flashed FW 242. The colors are now the same as I've set.


echt nervig..

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 6:53 pm
by JohnnyBlack
verdammt. Hast du mal alle FW Versionen durchprobiert, die es so gibt? Eine davon muss ja funktionieren.

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 8:00 pm
by carmyyy
JohnnyBlack wrote:verdammt. Hast du mal alle FW Versionen durchprobiert, die es so gibt? Eine davon muss ja funktionieren.



hab ich kann nicht mehr zurück patchen auf 245.....

Re: after a hard fight with display

PostPosted: Mon Mar 29, 2021 9:25 pm
by TheLaGmAn
what was your original firmware version?
and what version of goverlay are you running?

Re: after a hard fight with display

PostPosted: Tue Mar 30, 2021 2:41 pm
by carmyyy
TheLaGmAn wrote:what was your original firmware version?
and what version of goverlay are you running?


support send me fimeware 245 its working but the colors not.

So i need 245IPS ? Fimeware the 242IPS its not working...

Re: after a hard fight with display

PostPosted: Tue Mar 30, 2021 3:21 pm
by carmyyy
TheLaGmAn wrote:what was your original firmware version?
and what version of goverlay are you running?



i testet all version but only the 245 its working. i need ips version

Re: after a hard fight with display

PostPosted: Wed Mar 31, 2021 5:19 pm
by TheLaGmAn
okay, im confused regarding if 245 is working properly or not.
please continue this issue with coldtearselectronics@gmail.com since hes the one that can provide a differernt firmware if needed