Energy Saving Mode

[Sash83]

I startet the Software and then connect the Display. The Log is from this Point.

I warnt to try another cable this evening.

[TheLaGmAn]

okay, then i will need a video of the issue because im not understanding it.

energy save mode will appear if the device is not receiving any new data to be displayed or it reconnects.
the first picture you sent only seems to have 1 sensor which displays mhz, if that data does not change overtime, the display will eventually go into saving mode because nothing new is being requested to be displayed since that sensor number isnt changing

[Sash83]

Cable, other USB Port, other PC, nothing work.

Video
VID_20201222_183729.mp4

[TheLaGmAn]

okay, contact me at support@goverlay.com , we will need to do a teamviewer session to check a couple of things

[channyein]

Any luck? I have same problem.

[TheLaGmAn]

what problem are you having?

[channyein]

Same problem like him.Screen shows "Energy saving modes. Run goverlay to srart" and some random flash on it. Same as the video he uploaded.

[TheLaGmAn]

contact coldtearselectronics@gmail.com regarding this issue

[Sash83]

After several attempts with flash programs and so on, I finally got a new board in exchange.

Was very easy to swap.