LCD still backlit if PC shutdown - solution

[lcd9999]

LCD still backlit if I shutdown PC. My PC has permanent power +5 V into all USB ports, even if PC is shutdown. In BIOS nothing to change it. I made small improvement today. I used 2x USB bracket this type:



and cut off one RED wire. Then I connect this into one free HDD Molex connector (RED wire) from power supply.



If is PC off, then +5 V to lcd panel off. If I power on PC, is panel powered too.

Is possible use 4x USB bracket and cut off all red wires and direct connect into +5 V Molex, for more USB accessories.

[TheLaGmAn]

cool mod, thanks for sharing!

[lcd9999]

And I recommend this angle cable for USB display: http://www.ebay.com/itm/371513670197