Problem. Fast refresh mode stay always activated....

[jon.191023]

I don't understand but since these last days after i Resized pictures on my profil. The fast Refresh mode activated himself on my LAN without action on my side.
I tried to force normal mode from server side but it doesn't change anything...

From my GoverlayPlus app :

From my server side account configuration

Do you have an explanation about it ?

I Would like to turn off that mode in order to reduce stress on CPU hardware calls.

[TheLaGmAn]

Fast refresh mode will deactivate itself 30 seconds to 1 minute after the profile does not request it, so if you have it set to normal mode, it can take up to 1 minute to disable it.
Do you still have it on fast refresh? If so, we will need to do a teamviewer session to check it out

[jon.191023]

Fast refresh mode will deactivate itself 30 seconds to 1 minute after the profile does not request it, so if you have it set to normal mode, it can take up to 1 minute to disable it.
Do you still have it on fast refresh? If so, we will need to do a teamviewer session to check it out

It always been desactivated on every profil I have (Always on Normal mode I mean). I never turned on that option and it doesn't turn off from my side whatever I tried from server side....
That's why I don't understand.

I switched on different profile with default normal mode = no effect.
Reboot device = no effect.
Restart computer = no effect.

An interesting thing concern the logs datas from the Goverlay App. My device client seems to continue to request a fast refresh to the socket server while the profile is still on normal mode...

[TheLaGmAn]

i think i found the issue why it wouldnt go back to normal mode.
Can you give it a try now? reboot the device if after a profile re-load it still doesnt work.

[jon.191023]

IT WORKS ONCE AGAIN !!!!!
The client device doesn't request fast refresh mode in the logs after the last reboot.
Very nice job.

Thx a lot for your help !!